Login
Currently Shopping:
Bloomington
The Apollo International™ Model 910F-LFA Flanged Cast Swing Check Valve provides full flow capabilities. It provides reliable and economical protection against reverse flow. The Model 910F-LFA Swing Check Valve can be reliably installed in plumbing and heating systems (or building service piping). Valves are MSS SP-71 compliant and include NSF lead free certifications.
Apollo™ Swing Check Valve, Lead Free, Series: 910F-LFA, 4 in Nominal, Flanged, 200 psi CWP at 100 deg F, 125 lb Pressure Class, -20 to 406 deg F, Yes Low Lead Compliance, 526 gpm, Full Port, Media: Water, 11-1/2 in Inlet to Outlet Length, 6.61 in Top to Inlet Center, Cast Iron Body, Cast Iron/Bronze Trim, PTFE/Graphite Softgoods, Epoxy Powder Coated
| Body Material | : | Cast Iron |
| End Style | : | Flanged |
| Finish | : | Epoxy Powder Coated |
| Flow Rate | : | 526 gpm |
| Inlet to Outlet Length | : | 11-1/2 in |
| Low Lead Compliance | : | Yes |
| Media | : | Water |
| Nominal Size | : | 4 in |
| Port Type | : | Full |
| Pressure Class | : | 125 lb |
| Pressure Rating | : | 200 psi CWP at 100 deg F |
| Series | : | 910F-LFA |
| Softgoods Material | : | PTFE/Graphite |
| Temperature Rating | : | -20 to 406 deg F |
| Top to Inlet Center | : | 6.61 in |
| Trim Material | : | Cast Iron/Bronze |
- Compatible with ANSI class 125 and 150 lb flanges
- Minimal pressure drop
- Bolted bonnet
- Integral bronze seat
- FDA food grade epoxy powder coat finish
- PTFE gasket/Graphite body gasket
- Cast iron disc/bronze seat
- Lead free - The wetted surfaces of this product shall contain no more than 0.25% lead by weighted average
Instruction/Installation Manual