MIFAB® MI-XHUB-8
  1. pin-int

MIFAB® MI-XHUB-8

8" Heavy Duty Shielded Coupling, No Hub End Style, 304 Stainless Steel, MIFAB® MI-XHUB-8

  • Manufacturers: Mifab Corp
  • Brand Name: MIFAB®
  • Part#: 232881
  • MPN: MI-XHUB-8
  • Min. Order Qty: 1
  • Qty. Interval: 1
  • Company Availability: loading branchavailability

MIFAB® Series MI-XHUB heavy duty shielded no hub couplings are manufactured with gaskets made from neoprene compound that meets the requirements of ASTM C-564 housed inside a Type 301 stainless steel corrugated shield. Four (2 through 4 in size), six (5 through 15 in size) Type 301 stainless steel clamps tightened with 3/8 in Type 305 stainless steel hex head screws surround the shield to provide the sealing force. MI-XHUB Series Couplings are tested and certified to the ASTM-C1540-2011, FM1680-1989 and CSA B602-2016 Standards and are listed with IAPMO. Also tested and certified by Intertek Testing Services to CAN/ULC S102.2-10 Smoke Test.

MIFAB® Coupling, Heavy Duty Shielded, Series: MI-XHUB, Fitting/Connector Type: Coupling, 8 in Nominal, No Hub, 304 Stainless Steel, 4 in H, Import

Dimensions      :      4 in H
Domestic/Import      :      Import
End Style      :      No Hub
Fitting/Connector Type      :      Coupling
Material      :      304 Stainless Steel
Nominal Size      :      8 in
Series      :      MI-XHUB
Type      :      Heavy Duty Shielded
  • Red shield - A distinctive red stainless steel shield easily identifies MIFAB¿¿¿s heavy duty MI-XHUB no hub couplings
  • Mechanical interlocking clamp design - A one piece stainless steel screw housing mechanically interlocks the housing to the stainless steel band
  • This one piece housing eliminates leak paths that can develop with welded or staked clamps
  • Floating eyelet design - The stainless steel clamp bands can move independently from the corrugated stainless steel shield
  • This independence prevents the shield from crimping during tightening which can lead to leaks
  • 3/8 in Hex head screw - The stainless steel 3/8 in hex head screw is engineered to accept 80 in pounds of installation torque to ensure a secure band/shield assembly around the pipe/fittings
  • Formed gasket design - The gasket is designed to form fit around the pipe and the inside of the shield so that when the clamping forces are applied, a superior sealing pressure and holding power is achieved
  • MIFAB® gaskets are made from neoprene which meets the requirements of ASTM C564