Login 
Lasco® Fittings, Inc's comprehensive line of PVC fittings offers a variety of injection molded configurations in SCH 40/STD sizes 3/8 in through 12 in conforming to ASTM D 2466.
Lasco® Male Adapter, Fitting/Connector Type: Adapter, 2-1/2 in Nominal, Socket x MNPT, 3-7/8 in Length, SCH 40/STD, 125 lb, Injection Molded, PVC, Buna-N O-Ring Seal, White, 140 deg F, Domestic
| Color | : | White |
| Domestic/Import | : | Domestic |
| End Style | : | Socket x MNPT |
| Fitting/Connector Type | : | Adapter |
| Length | : | 3-7/8 in |
| Material | : | PVC |
| Method of Manufacture | : | Injection Molded |
| Nominal Size | : | 2-1/2 in |
| Pressure Class | : | 125 lb |
| Schedule Rating | : | SCH 40/STD |
| Seal Material | : | Buna-N O-Ring |
| Temperature Rating | : | 140 deg F |
- ASTM D-1784: Rigid poly vinyl chloride (PVC) compounds and chlorinated poly vinyl chloride (CPVC) compounds
- ASTM F-1970: Standard specification for special engineered fittings, appurtenances or valves for use in poly vinyl chloride (PVC) or chlorinated poly vinyl chloride (CPVC) systems
- Lasco® SCH 40 fittings are produced from PVC type 1, cell classification 12454-B
- NSF/ANSI standard 61, Annex G: Drinking water system components Weighted average lead content of less than or equal to 0.25% and is in compliance with California's Health and safety code Section 116875 (commonly known as AB 1953)
- Not to be used in the hot or cold water distribution system in a dwelling maximum service temperature 140 deg F
- Do not use Lasco® fittings for compressed air or gases
- Do not test PVC piping systems with compressed air or gases
- Do not use fittings with liquids not recommended by Lasco®
- Fitting modification voids the warranty
Specification Sheet