| Color | : | White |
| Domestic/Import | : | Domestic |
| End Style | : | MNPT x FNPT |
| Fitting/Connector Type | : | Bushing |
| Length | : | 1-1/2 in |
| Material | : | PVC |
| Method of Manufacture | : | Injection Molded |
| Nominal Size | : | 2 x 1-1/2 in |
| Schedule Rating | : | SCH 40/STD |
| Seal Material | : | Buna-N |
| Temperature Rating | : | 140 deg F |
Lasco® Reducing Bushing, Fitting/Connector Type: Bushing, 2 x 1-1/2 in Nominal, MNPT x FNPT, 1-1/2 in Length, SCH 40/STD, Injection Molded, PVC, Buna-N Seal, White, 140 deg F, Domestic
- ASTM D1784 - Rigid poly vinyl chloride (PVC) compounds and chlorinated poly vinyl chloride (CPVC) compounds, class 23447
- ASTM F1970 - Standard specification for special engineered fittings, appurtenances or valves for use in poly vinyl chloride (PVC) or chlorinated poly vinyl chloride (CPVC) systems
- Material - Lasco® SCH 40/STD fittings are produced from PVC type 1, cell classification 12454-B O-rings are produced from a Buna- N (nitrile) material
- NSF/ANSI standard 61, Annex G - Drinking water system components weighted average lead content of less than or equal to 0.25% and is in compliance with California's health and safety code section 116875 (commonly known as AB1953) NSF/ANSI standard 14 - plastics piping system components and related materials
- Not to be used in the hot or cold water distribution system in a dwelling maximum service temperature 140 deg F
- Do not use Lasco® fittings for compressed air or gases
- Do not test PVC piping systems with compressed air or gases
- Do not use fittings with liquids not recommended by Lasco®
- Fitting modification voids the warranty