| Domestic/Import | : | Domestic |
| End Style | : | Male SAE Flare x Swivel Female SAE Flare |
| Flow Rate | : | 25 to 35 scfh |
| Includes | : | Adjustable Dial |
| Nominal Size | : | 1/4 in |
| Pressure Rating | : | 200 psi |
The Nitrogen Purge Tool is a quick and easy way to purge copper pipes with nitrogen. Then, with a turn of the dial, quickly switch to a very low ow of nitrogen to properly braze the copper. It has a durable aluminum design so you can just throw it into your tool bag when you are done.
Diversitech Nitrogen Purge Tool, 1/4 in Nominal Size, Male SAE Flare x Swivel Female SAE Flare, 200 psi, 25 to 35 scfh, Domestic
- Purge flows rate of 25 to 35 scfh, 19 to 23 lpm (0.03 dia orifice) at 50 psig regulator pressure
- Braze flows rate 3 to 6 scfh, 2 to 3 lpm (0.01 dia orifice) at 50 psig regulator pressure
- 50 psig inlet pressure for proper flows rates
- The purge valve is not a regulator and therefore the output pressure will equal the input pressure when the outlets is blocked
- It is not intended to be used with the outlets blocked
- The user should not weld a completely closed look as the pressure will build
- We recommend removing the Schrader valve and letting it vent
- 7/16 to 20 in thread size