| Amperage Rating | : | 1.75 A |
| Bearing Type | : | Sleeve |
| Dimensions | : | 14-7/8 in L x 6-3/8 in H |
| Frequency Rating | : | 60 Hz |
| Impeller Type | : | Centrifugal |
| Maximum Pressure | : | 125 psi |
| Motor Speed | : | 1725 rpm |
| Power Rating | : | 1/12 hp |
| Series | : | 100 |
| Temperature Rating | : | 225 deg F |
| Type | : | 3-Piece |
| Voltage Rating | : | 115 VAC |
For applications requiring higher flow and head pressures, Bell and Gossett provides an entire range of booster pumps. The designs of these pumps are based on three-part configuration which offers complete field reparability and compact construction. All Bell and Gossett boosters are equipped with the incomparable B and G manufactured motor for quiet and efficient operation.
Bell & Gossett Booster Pump, 3-Piece, Model 100 AB, Series 100, 1/12 hp, 115 VAC, 1.75 A, 60 Hz, 125 psi Maximum, 1725 rpm Motor, Centrifugal Impeller, 225 deg F, Sleeve Bearing, 14-7/8 in L x 6-3/8 in H
- Oil lubricated circulator
- Bronze body
- 115V With built-in overload protection
- Sleeve bearing, oil lubricated with replaceable resilient motor mounts
- Noise dampening coupler
- Bell & Gossetts own flexible spring design adds to quiet operation, do not accept a substitute
- Long bronze sleeve bearings maintain exact shaft alignment
- Provides for constant circulation of oil over bearing surfaces
- Precision ground pump shaft is oversized to provide large bearing surfaces
- Hardened integral thrust collar minimizes end-thrust to ensure long seal and bearing life
- The Bell & Gossett mechanical seal is designed to withstand the wide range of water temperatures, pressures, additives and dissolved solids common in hydronic systems
- Centrifugal impeller prevents accumulation of air at seal faces to assure long life
- Close impeller/body tolerances minimize water slippage and maximize efficiency
- Single phase motor
- Potable water is supplied
- Lead free
- 3/4, 1, 1-1/4 and 1-1/2 in NPT flange
- Model 100 AB