| Actuator Type | : | Handle |
| Body Material | : | Brass |
| Dimensions | : | 4-7/16 in Flange, 3-25/64 in Inlet to Outlet Length x 3 in Top to Inlet Center Valve |
| Domestic/Import | : | Import |
| End Style | : | SWT |
| Finish | : | Chrome Plated |
| Includes | : | Capscrews and Nuts |
| Nominal Size | : | 1-1/4 in |
| Pressure Rating | : | 150 psig |
| Softgoods Material | : | Teflon Packing/Seat Ring |
| Temperature Rating | : | 200 deg F |
| Trim Material | : | Brass Stem |
Check-Trol is the solution for circulator installations. Installing a Check-Trol on the discharge of the circulator gives you the features of a Flow Control Valve, Isolation Valve and Companion Flange. Another advantage of the Check-Trol is the minimal pressure drop, especially when compared to the losses that can be experienced when a check valve is installed internal to the circulator. The Check-Trol flanges are packaged with an isolation flange of the same size to create a pair.
Bell & Gossett Check-Trol ™ Isolation Flow Control Flange, 1-1/4 in Nominal Size, SWT, 150 psig, 200 deg F, Handle Actuator, Brass Body, Brass Stem Trim, Teflon Packing/Seat Ring, Chrome Plated, 4-7/16 in Flange, 3-25/64 in Inlet to Outlet Length x 3 in Top to Inlet Center Valve, Import
- Combines three valves in one-isolation valve, check valve and companion flange
- Free floating flange allows easy alignment and installation of pumps
- Prevents gravity circulation
- Isolates the circulator so you don't need to drain the entire system
- 50 state lead free compliant
- Suitable for use with Model NRF/NBF/SSF, Series PL-30, PL-36, PL-55, Series 100, PR, and LR B and G circulators
- Contains less than 0.25% Lead content by weight on wetted surface
- Construction: lead free brass valve body, chrome plated steel flange and lead-free brass ball, nitrile/acetal/stainless steel spring check