| Body Material | : | Bronze |
| Dimensions | : | 1.93 in H |
| Domestic/Import | : | Domestic |
| End Style | : | FNPT |
| Flow Rate | : | 6 gpm |
| Inlet to Outlet Length | : | 3-1/2 in |
| Media | : | Steam/Water |
| Nominal Size | : | 1 in |
| Pressure Rating | : | 400 psi |
| Series | : | 61-100 |
| Softgoods Material | : | RPTFE |
| Temperature Rating | : | 406 deg F |
| Trim Material | : | Brass Stem |
| Warranty | : | 5 Years |
The Apollo Model CVB check valve with rugged bronze body and patented design (U.S. Pat. No. 4,172,465) RPTFE ball-cone check provides reliable protection against reverse flow. It is spring-loaded for fast seating and center guided for optimum alignment.
Apollo™ Ball Cone® In-Line Check Valve, Series: 61-100, 1 in Nominal, FNPT, 400 psi Pressure Rating, 406 deg F Temperature, 6 gpm, Media: Steam/Water, 3-1/2 in Inlet to Outlet Length, Bronze Body, Brass Stem Trim, Softgoods Material: RPTFE, 1.93 in H, Domestic
- FNPT and MNPT inlet option
- Spring actuated
- Tight shut-off with liquid media
- Flow straight through design efficiency
- RPTFE ball cone® for chemical resistance
- 100% factory tested
- For liquids the flow co-efficient Cv expresses the flow capacity in gallons per minute (gpm) of 60 deg F water with a pressure drop of 1 psi (lb/in2)
- KV the flow of water with temperature ranging 5 to 30 dig C through a valve in cubic meters per hour (m3/H) with a pressure drop of 1 bar
- ASTM B16 brass retainer
- 15% glass filled, ball cone check RPTFE
- Cracking pressure 0.5 psig
- Well suited for a broad range of applications, including saturated steam and chemical service
- May be installed in both horizontal and vertical flow with upward flow
- Do not use for reciprocating air compressor service
- 400 psi at 100 deg F/125 psi steam at 350 deg F
- Cast bronze body
Recently Viewed