Login 
This portable pump is perfect for boosting water pressure, draining hot water tanks and general water transfer. Features include a one-piece cast aluminum pump and motor housing with integral carry handle, permanently lubricated bearings, a convenient On/Off switch, and a powerful 1/2 hp motor capable of pumping to over 100 feet of head. Not intended for permanent installations.
Liberty Pumps® Transfer Pump, Portable Heavy Duty, 1/2 hp, 115 V, 8 A, 7500 rpm Motor, Ball Bearing, 3/4 in, 20 ft Cord, Cast Aluminum, 9-3/4 in L x 4-1/2 in W x 7 in H, Import
| Amperage Rating | : | 8 A |
| Bearing Type | : | Ball |
| Cord Length | : | 20 ft |
| Dimensions | : | 9-3/4 in L x 4-1/2 in W x 7 in H |
| Domestic/Import | : | Import |
| Horsepower | : | 1/2 hp |
| Hose Diameter | : | 3/4 in |
| Material | : | Cast Aluminum |
| Motor Speed | : | 7500 rpm |
| Type | : | Portable Heavy Duty |
| Voltage Rating | : | 115 V |
| Warranty | : | 3 Years Limited |
- One-piece cast aluminum pump and motor housing with integral carry handle
- Durable epoxy powder coat finish
- Convenient On/Off switch
- 3/4 in brass garden hose connectors
- Glass reinforced thermoplastic impeller
- Permanently lubricated ball bearings
- Large prime plug with internal funnel design for easy priming
- Easily replaced motor brushes
- Maximum discharge head of 105 ft
- Maximum suction lift of 15 ft
- 60 Hz frequency rating
- 135 deg F maximum fluid temperature
- Note: the model 331 is not intended for use in wet or damp areas, motor is not submersible
- Not intended to pump chemicals or flammable liquids and motor brushes require replacement approximately every 300 hours of use