For applications requiring higher flow and head pressures, Bell and Gossett provides an entire range of booster pumps. The designs of these pumps are based on three-part configuration which offers complete field reparability and compact construction. All Bell and Gossett boosters are equipped with the incomparable B and G manufactured motor for quiet and efficient operation.
Bell & Gossett Booster Pump, 3-Piece, Model 100NFI, Series 100, 1/12 hp, 115 VAC, 1.75 A, 60 Hz, 125 psi Maximum, 1725 rpm Motor, Centrifugal Impeller, 225 deg F, Sleeve Bearing, 14-7/8 in L x 6-3/8 in H
Amperage Rating |
: |
1.75 A |
Bearing Type |
: |
Sleeve |
Dimensions |
: |
14-7/8 in L x 6-3/8 in H |
Frequency Rating |
: |
60 Hz |
Impeller Type |
: |
Centrifugal |
Maximum Pressure |
: |
125 psi |
Motor Speed |
: |
1725 rpm |
Power Rating |
: |
1/12 hp |
Series |
: |
100 |
Temperature Rating |
: |
225 deg F |
Type |
: |
3-Piece |
Voltage Rating |
: |
115 VAC |
- Oil lubricated circulator
- Cast iron body
- 115V With built-in overload protection
- Sleeve bearing, oil lubricated with replaceable resilient motor mounts
- Noise dampening coupler
- Bell & Gossetts own flexible spring design adds to quiet operation, do not accept a substitute
- Long bronze sleeve bearings maintain exact shaft alignment
- Provides for constant circulation of oil over bearing surfaces
- Precision ground pump shaft is oversized to provide large bearing surfaces
- Hardened integral thrust collar minimizes end-thrust to ensure long seal and bearing life
- The Bell & Gossett mechanical seal is designed to withstand the wide range of water temperatures, pressures, additives and dissolved solids common in hydronic systems
- Centrifugal impeller prevents accumulation of air at seal faces to assure long life
- Close impeller/body tolerances minimize water slippage and maximize efficiency
- Single phase motor
- 3/4, 1, 1-1/4 and 1-1/2 in NPT flange
- Model 100NFI
-
Brochure
https://www.capitolgroupinc.com//ASSETS/DOCUMENTS/ITEMS/EN/Xylem_112112_Brochure.pdf