Login 
Maxitrol's 325 Series pounds to inches regulators are for use on residential, commercial, and industrial applications. The 325 Series features a high leverage valve linkage assembly to deliver positive dead-end lock-up. The regulators are capable of precise control from full flow down to pilot flow. 325 Series regulators are for 2 psi and 5 psi piping systems. Models available for appliance main burner or pilot applications and as line pressure regulators.
Maxitrol® Gas Appliance Pressure Regulator, Lever Acting, Series: 325, 1/2 in Nominal Size, Threaded, 10 psi, -40 to 205 deg F, Media: Natural/Manufactured/Mixed Gases/LPG and LP Gas-Air Mixtures, 5.9 in Inlet to Outlet Length, Aluminum Body, 5.3 in H
| Body Material | : | Aluminum |
| Dimensions | : | 5.3 in H |
| End Style | : | Threaded |
| Inlet to Outlet Length | : | 5.9 in |
| Media | : | Natural/Manufactured/Mixed Gases/LPG and LP Gas-Air Mixtures |
| Nominal Size | : | 1/2 in |
| Pressure Rating | : | 10 psi |
| Series | : | 325 |
| Temperature Rating | : | -40 to 205 deg F |
| Type | : | Lever Acting |
- Suitable for multi-positional mounting, If ball check vent limiting device is installed, mount in an upright position only
- Note: capacities are used to determine the maximum multiple appliance load, the largest single appliance served by the regulator should not exceed the maximum individual load specified above
- Minimum Regulation: Suitable for pilot flow applications
- 65 psi emergency exposure limit (inlet side only)
- 3/8 in NPT vent connection
- 4.9 in swing radius
- Maximum Individual Load: 325000 Btu/hr
- Total load of multiple appliance combined capacity: 325000 Btu/hr
- 7 to 11 in wc, 1.7 to 2.7 kPa at 2 psi (white CSA certified springs)